Search Results

Training / Education

Navigating Requirements for International Certification of Aviation Products

This course describes the basic elements of the process for achieving a successful aircraft certification globally once certification by the State of Design has been accomplished. The regulatory framework established under ICAO is presented with discussion of how major countries around the world comply with the ICAO Standards and Recommended Practices (SARPs). The uncertainty of how each country performs validation is a challenge. This course identifies common validation practices and key bilateral agreements which facilitate acceptance of aviation products from one country to another.

Training / Education

The Nature of Automated Vehicle Safety Will SAE Level 5 Ever Be Achieved?

The automated vehicle industry has been busy designing, developing, and deploying several self driving vehicles and services in the last few years. However, much of the outcomes and the overall outlook of the vehicle and services, such as robotaxis, are not great. Customers and stakeholders complain that the level of automation is low, mostly SAE Levels 1, 2, and very little of Level 3. It appears that Level 4 is far out in the horizon and many wonder if Level 5 is actually achievable.

Training / Education

Introduction to Airframe Engineering Design for Manufacturing, Assembly and Automation

This course is verified by Probitas Authentication as meeting the AS9104/3A requirements for continuing Professional Development. Why is a design for manufacturing, assembly and automation so important? This introductory course on airframe engineering will cover the importance of design for manufacturing, assembly and automation in aerospace. It will review what the key drivers are for a “good” design and some of the key points for manufacturing and assembly of aircraft components. It will look at how an engineer can combine traditional technologies with new, cutting-edge technologies, to determine the best scenario for success.

Training / Education

Fundamentals of Threaded Fasteners

Fastener experts believe that upwards of 95% of all fastener failures are the result of either the wrong fastener for the job or improper installation. Improper installation or incorrect fastener selection can result in catastrophic loss or damage. Learn how to avoid issues by getting the answers in this course.

Training / Education

PFMEA and the Control Plan - Overview and Application

The Process FMEA and Control Plan program introduces the basic concepts behind this important tool and provides training in how to conduct an effective PFMEA. First, the course explains what a PFMEA is and how it improves the long-term performance of your products, services and related processes by addressing process related failures. The role of the PFMEA in the overall framework of Quality Management System Requirements is explained as well as the role of the PFMEA in the Advanced Product Quality Planning (APQP) process. Additionally, the differences and relationships between the DFMEA and PFMEA are well defined.

Training / Education

Applying DO-254 for Avionics Hardware Development and Certification

2024-11-20

This basic course introduces the intent of the DO-254 standard for commercial avionics hardware development. The content will cover many aspects of avionic hardware including, aircraft safety, systems, hardware planning, requirements, design, implementation, and testing. Participants will learn industry-best practices for real-world hardware development, common DO-254 mistakes and how to prevent them, and how to minimize risks and costs while maximizing hardware quality.

Training / Education

Applying Automotive EDR Data to Traffic Crash Reconstruction

2024-10-22

EDR's were first installed in 1994 and are now installed in 99% of new light vehicles sold in the US. In the US EDR’s are not required, but vehicles with EDR’s made after 9/1/2012 must meet minimum standardized content requirements of 49 CFR, Part 563 including speed, throttle, brake on/off and Delta V.  Data must be retrievable with a publicly available tool.  Only a few manufacturers install EDR’s worldwide currently, but the EU and China are adopting regulations to require them in the next few years.  

Training / Education

Fundamentals of Motor Vehicle Fire Investigation

2024-09-24

The manner in which a motor vehicle fire is initiated and subsequently spreads is dependent on a number of complex, interdependent, phenomena including combustion kinetics, heat transfer and fluid dynamics. Because the damage caused by a fire is coupled to these phenomena, damage patterns can sometimes be used to understand certain characteristics about the fire. In many cases, the goal is to determine the cause and origin of the fire.

Training / Education

ADAS Application Automatic Emergency Braking

2024-09-19

Active safety and (ADAS) are now being introduced to the marketplace as they serve as key enablers for anticipated autonomous driving systems. Automatic emergency braking (AEB) is one ADAS application which is either in the marketplace presently or under development as nearly all automakers have pledged to offer this technology by the year 2022. This one-day course is designed to provide an overview of the typical ADAS AEB system from multiple perspectives.

Training / Education

Vehicle Crash Reconstruction Principles and Technology

2024-09-17

Crash reconstruction is a scientific process that utilizes principles of physics and empirical data to analyze the physical, electronic, video, audio, and testimonial evidence from a crash to determine how and why the crash occurred. This course will introduce this reconstruction process as it gets applied to various crash types - in-line and intersection collisions, pedestrian collisions, motorcycle crashes, rollover crashes, and heavy truck crashes. Methods of evidence documentation will be covered. Analysis methods will also be presented for electronic data from event data recorders and for video.

Training / Education

Injuries, Anatomy, Biomechanics & Federal Regulation

2024-09-09

Safety continues to be one of the most important factors in motor vehicle design, manufacturing, and marketing.  This course provides a comprehensive overview of these critical automotive safety considerations: injury and anatomy; human tolerance and biomechanics; occupant protection; testing; and federal legislation. The knowledge shared at this course enables participants to be more aware of safety considerations and to better understand and interact with safety experts. This course has been approved by the Accreditation Commission for Traffic Accident Reconstruction (ACTAR) for 18 Continuing Education Units (CEUs).

Training / Education

Photogrammetry and Analysis of Digital Media

2024-08-28

Photographs and video recordings of vehicle crashes and accident sites are more prevalent than ever, with dash mounted cameras, surveillance footage, and personal cell phones now ubiquitous. The information contained in these pictures and videos provide critical information to understanding how crashes occurred, and  analyze physical evidence. This course teaches the theory and techniques for getting the most out of digital media, including correctly processing raw video and photographs, correcting for lens distortion, and using photogrammetric techniques to convert the information in digital media to usable scaled three-dimensional data.

Training / Education

Development and Practice of Airborne Electronic Hardware Based on DO-254

2024-08-27

This course is offered in China only and presented in Mandarin Chinese. The course materials are bilingual (English and Chinese). Participants in this course comprehensive understanding of the DO-254 standard including how the development of airborne electronic hardware (AEH) and the development of the aircraft system are related. It addresses the key objectives, activities, and generated data of the AEH lifecycle and presents common problems in the application of DO-254 and how to prevent them. This course also includes current AEH certification requirements and interprets some of the difficulties in gaining compliance approval.

Training / Education

Autonomous Technology in Long-Haul Trucking

2024-07-30

Billions of dollars have been invested in AV trucking. It is no longer a matter of IF, it is a matter of When, Where, Who and How? This will be the most disruptive event to happen in our supply chains in more than 4 decades. Are you ready to help your company usher in the most disruptive technology? This class will help you prepare and understand what you will need to do to become part of the ecosystem. You will learn how to identify what needs to start, stop, and change for you to adopt, integrate, and scale. Join us to learn the answers to key questions like the following: 1)How will maintenance change in the AV trucking ecosystem?

Training / Education

DO-326A and ED-202A An Introduction to the New and Mandatory Aviation Cyber-Security Essentials

2024-07-29

This course will introduce participants to industry best practices for real-world aviation cyber-security risk-assessment, development & assurance. Participants will learn the information necessary to help minimize DO-326/ED-202-set compliance risks and costs, while also optimizing cyber-security levels for the development, deployment and in-service phases Topics such as aircraft security aspects of safety, systems-approach to security, security planning, the airworthiness security process, and security effectiveness assurance will be covered.

Training / Education

Aircraft Cabin Safety and Interior Crashworthiness

2024-07-23

This two-day course will begin with a discussion of commercial off the shelf (COTS) test requirements.  The instructor will then guide participants through the various cabin interior emergency provisions and their requirements such as supplemental passenger oxygen, emergency equipment, seats, flammability, emergency exits, emergency lighting and escape path markings, and various other cabin interior systems.  

Training / Education

The Role of Just Culture in an Effective Safety Management System

2024-07-22

The cost of this introductory course can be applied to the cost of the full courses: C2215, Safety Management Systems for Design, Manufacturing and Maintenance Providers in Aviation C2216, Safety Risk Management and Safety Assurance for Design, Manufacturing and Maintenance Providers in Aviation Historically, organizations tend to be punitive and focused on who to blame when an unwanted event occurs. Investigations can begin with the intent to blame and discipline which leads to adversarial relationships between management and employees. 

Training / Education

Sensors and Perception for Autonomous Vehicle Development

2024-07-08

This 4-week virtual-only experience, conducted by leading experts in the autonomous vehicle industry and academia, provides an in-depth look at the most common sensor types used in autonomous vehicle applications. By reviewing the theory, working through examples, viewing sensor data, and programming movement of a turtlebot, you will develop a solid, hands-on understanding of the common sensors and data provided by each. This course consists of asynchronous videos you will work through at your own pace throughout each week, followed by a live-online synchronous experience each Friday. The videos are led by Dr.

Training / Education

AS9145 Requirements for Advanced Product Quality Planning and Production Part Approval

2024-07-08

This course is verified by Probitas as meeting the AS9104/3A requirements for Continuing Professional Development. Production and continual improvement of safe and reliable products is key in the aviation, space, and defense industries. Customer and regulatory requirements must not only be met, but they are typically expected to exceeded requirements. Due to globalization, the supply chain of this industry has been expanded to countries which were not part of it in the past and has complicated the achievement of requirements compliance and customer satisfaction.

Training / Education

AS13100 and RM13004 Design and Process Failure Mode and Effects Analysis and Control Plans

2024-07-03

This course is verified by Probitas Authentication as meeting the AS9104/3A requirements for continuing Professional Development. In the Aerospace Industry there is a focus on Defect Prevention to ensure that quality goals are met. Failure Mode and Effects Analysis (PFMEA) and Control Plan activities are recognized as being one of the most effective, on the journey to Zero Defects. This two-day course is designed to explain the core tools of Design Failure Mode and Effects Analysis (DFMEA), Process Flow Diagrams, Process Failure Mode and Effects Analysis (PFMEA) and Control Plans as described in AS13100 and RM13004.